LXplastic Machinery Co., Ltd

Products

	BOPS Thermoforming Machine

Click to enlarge image

Model Number

LX2220A thermoforming machine

Production :(forming , triming(cut-in place) on one operation ).
blisters and clamshell packages as well as trays, disposable containers for packaging of consumer products, appliances, electronics, construction, hardware, cosmetics, food, toys and automotive accessories from polymers BOPS PS PVC PET and HIPS with forming , triming(cut-in place) on one operation .

DESIGN FEATURE
1. Programmable PLC and touch screen

2. Ability to store and recall all previous job settings and information of mold

3. Precise index accuracy utilizing Computerized AC servo drive system

4. Form and cut-in-place (triming) in one station

5.Electric preheater and Multi-zone contact heating system

6.Computerized AC servo drive sheet transport

7. High speed forming system and Pneumatic press operation

8.Ideally suited for roll-fed thermoplastic sheet including BOPS PS PVC PET and HIPS.

9.Allows automatically greasing of all major components

DETAILS

1.Scrap rewind systemAn motor with speed control maintains a consistent web tension as scrap is rewound onto the scrap shaft.

2.Compact design :requires just one- third the floor space of a traditional machine

3.Programmable PLC: Operating programs can be stored in the PLC and automatically downloaded for fast setup.

4.High speed production:it is capable of operating up to 25 cycle per min Max. (dependant on material type , thickness,and mold ).

5.Servo: The operator sets the required length in inches and the computer will automatically program and display the selected index length on the screen.

6.Sequencing: The operator has visual access on the screen of all machine functions with the on/off time settings. Set-up and editing of these functions can be controlled by the touch screen during normal production operation.

7.Heater Temperature: The operator will select the heat desired in each zone. The controller sets and monitors the temperature and displays the set and actual temperature. The controller turns each zone on and off to maintain the set temperature. The temperature can be easily changed while the machine is operating under production conditions.

8.Tool Storage: Ability to store and recall all previous job settings and information including the following data:

1.Tool number
2.ndex length
3.Allsequencing data
4.Material type
5.Material thickness
6.Dwell time
7.Cycle speed
8.Heater settings

SPECIFICATION
1.Color : Various
2.Packing wooden: case
3.Minimum Order : 1 set
4.Payment Term :TT
5.Forming Area : 510mm x 570mm maximum
6.Depth of Draw : 100mm maximum
7.Material Thickness Range: 0.15mm - 1.00 mm
8.Cycles per Minute: 25 maximum
9.Production: disposable containers like trays and bowels
10.Suitable material: BOPS PS PVC PET and HIPS sheet
11.SheetWidth: 650mm maximum
12.Power Consumption: 20 Kilowatts/hr (Approximate)
13.Air Pressure: 0.7Mpa
14.Air Consumption: 1200 Litres/min (42 CFM)
15.Cooling Water Consumption:6 Litres/min @ 15° - 20° C (1.5 gal/min @ 58°-68° F)